Crews Law 2 Safety Glasses with Gray IR 3.0 Lens
Bulk discount rates
Below are the available bulk discount rates for each individual item when you purchase a certain amount
|Buy 12 - 59||and get 3% off|
|Buy 60 or above||and get 5% off|
Crews Law 2: Solid and sturdy dielectric safety glasses.
When looking for the right pair of safety eyewear, the Crews Law 2 possesses the qualities required for optimum eye protection. The wraparound lens design offers an uninterrupted field of vision, paired with a greater coverage area to help prevent side impact. Available in a variety of lens tints for almost every application, with a soft nose piece and TPR (Thermal Plastic Rubber) temple inserts.
- Dielectric design
- Rubber nose piece
- Excellent orbital seal
- Higher level of protection from side impacts
- Thermal plastic rubber temple inserts
- Filters 99% of U.V. radiation
- Width: 140mm
- Lens Height: 40mm
- Temple Length: 120mm
Compliance: ANSI Z87.1-2015
Gray 3.0 IR Filter Lens: The darker Gray lenses still offer true color recognition, while endusers are able to torch solder, torch braze, and perform light cutting up to 1". The darker shades may also be ideal for some with light-sensitive eyes.
*NOTE - Welding Safety Glasses and Goggles using Shade 5 filters or lighter are not intended for arc welding, which requires a darker lens found in Welding Helmets (OSHA's 29 CFR 1910.252 lists the minimum lens shade requirements for a variety of welding operations).
Welding protection with IR Green shades, Cobalt, or other very dark lenses is NOT to be worn while operating moving vehicles, bicycles or any such apparatus, particularly on the road, as these shades can significantly impair one's ability to see traffic signals adequately or accurately. "Welding protection" includes, but is not limited to: glasses, goggles, shields, masks, hoods and helmets. Safety Glasses USA, Inc. is not responsible for any damage or injury caused by such activity.