KleenGuard Hellraiser Safety Glasses with Shade 3 Lens

The Hellraiser has a sleek design and is extremely lightweight. It fits a smaller profile, but can be used by all face sizes. The Hellraiser has a molded plastic nosepiece and protects from harmful UV rays.

Hellraiser Features:

• Extremely lightweight
• Plastic molded nosepiece
• Sleek design
• Smaller profile
• 99% UV protection

Shade 3.0 Lens:

• Protects against IR radiation in welding, brazing, cutting, and soldering environments
• 3.0 provides medium protection
• Offers protection from excessive glare
• Provides 99% protection from harmful UV-A and UV-B rays
• 100% polycarbonate lenses

Measurements:

• Temple Length: 125 mm
• Temple Width: 133 mm
• Lens Height: 38 mm
• Ideal for Small to Large faces

Compliance:

• ANSI Z87.1-2010
• CE-EN 166
• AS/NZS 1337

*NOTE - Welding Safety Glasses and Goggles using Shade 5 filters or lighter are not intended for arc welding, which requires a darker lens found in Welding Helmets (OSHA's 29 CFR 1910.252 lists the minimum lens shade requirements for a variety of welding operations).

Welding protection with IR Green shades, Cobalt, or other very dark lenses is NOT to be worn while operating moving vehicles, bicycles or any such apparatus, particularly on the road, as these shades can significantly impair one's ability to see traffic signals adequately or accurately. "Welding protection" includes, but is not limited to: glasses, goggles, shields, masks, hoods and helmets. Safety Glasses USA, Inc. is not responsible for any damage or injury caused by such activity.