KleenGuard Wildcat Cutting Goggles with Shade 5 Anti-Fog Lens
Bulk discount rates
Below are the available bulk discount rates for each individual item when you purchase a certain amount
|Buy 12 - 59||and get 3% off|
|Buy 60 or above||and get 5% off|
Be sure you are safe with the Jackson Wildcat Google. Not only will you be protected from dust and impact but this goggle will not melt, drip or ignite at 350° for five minutes. Comfortable for all-day wear. The elastic headband swivels for proper placement and the flexible frame's foam gasket forms a cushioned seal to keep out dust.
- Heat Resistant- will not melt, drip or ignite at 350° for five minutes
- Pivoting headband
- Anti-fog coating
- Adjustable side vents
- Meets ANSI D4 for dust protection
- Lenses provide 99.9% UVA/B/C protection
- Frame Width: 152 mm
- Lens Height: 48 mm
- ANSI Z87+
- CSA Z94.3
- D4 Rating for Dust Protection
*NOTE - Welding Safety Glasses and Goggles using Shade 5 filters or lighter are not intended for arc welding, which requires a darker lens found in Welding Helmets (OSHA's 29 CFR 1910.252 lists the minimum lens shade requirements for a variety of welding operations).
Welding protection with IR Green shades, Cobalt, or other very dark lenses is NOT to be worn while operating moving vehicles, bicycles or any such apparatus, particularly on the road, as these shades can significantly impair one's ability to see traffic signals adequately or accurately. "Welding protection" includes, but is not limited to: glasses, goggles, shields, masks, hoods and helmets. Safety Glasses USA, Inc. is not responsible for any damage or injury caused by such activity.