ESS Profile TurboFan Goggle Black Clear Gray Lenses
A longtime favorite of U.S. Special Forces groups, the ESS Profile TurboFan is better and tougher than ever. Following a series of vast improvements, the Profile TurboFan represents one of the most effective night-vision-compatible weapon against lens fogging.
Powered by a single AA battery, the TurboFan system draws fresh airflow in through the lower edge of the goggle frame and forces humid air out the top at around 13,000 rpm. Even when perspiration or temperatures are extreme, this two-speed system will exhaust humidity and dramatically reduce lens fogging for over 150 hours of continuous operation (low speed).
This improved fog-elimination system features the robust PowerPod battery pack, now with a push-button switch and repositioned near the back of the head for snag-free operation. New technology provides constant fan speeds as battery power diminishes, and an "Auto-off" timer shuts down the fan system to preserve battery life if accidentally left on. Water-resistant casing facilitates all-weather operation.
The extra-thick, 2.8mm polycarbonate lenses offer maximum impact protection and 100% UVA/UVB filtration. ESS's advanced ClearZone FlowCoat lens treatments provide the optimal combination of anti-scratch coatings on the outside of the lenses and anti-fog coatings on the inside.
All Profile Series lenses provide 100% UVA/UVB protection and distortion-free optical clarity. Profile Series Laser Protective Lenses (LPLs) are available.
The Profile TurboFan is compatible with the ESS U-Rx and P-2B Rx Inserts.
Ballistic Protection Standards
Compliant With: U.S. MIL SPEC MIL-DTL-43511D (Clause 3.5.10), ANSI Z87.1-2010, U.S. Federal OSHA, CE EN 166
Turbofan's Key Features:
- Fan-powered anti-fog system exhausts humidity at 13,000 rpm.
- Rugged PowerPod runs fan for 150 hours on a single AA battery.
- Low-profile night-vision-compatible frame with wide field of view.
- Anti-microbial OpFoam face padding increases comfort & fit.
- Advanced ESS ClearZone FlowCoat lenses eliminate fog inside & prevent scratches outside.
- Full-perimeter ventilation & filtration system minimizes lens fogging & filters airborne particles.
- Patented Outriggers position strap for optimal helmet compatibility.
- Interchangeable 2.8mm high-impact Polycarbonate lenses.
- Distortion-free optics & 100% UVA/UVB protection.
- Rx Inserts available (U-Rx).
ESS Profile Turbofan Kit Includes:
- (1) Black Profile TurboFan Goggle
- (1) Clear Profile Series Lens
- (1) Smoke Gray Profile Series Lens
- (1) Black SpeedSleeve
- (1) Soft Goggle Storage Case
- (1) Flannel Lens Sleeve
- (1) AA Battery
- (1) User's Guide
- (1) ESS Sticker
Made In USA