Pyramex GL602C3 Cut-Resistant A2 Micro-Foam Nitrile Gloves

If you're looking for a glove that can withstand serious abuse, then you need the Pyramex GL602C3 Cut-Resistant A2 Micro-Foam Nitrile Gloves. These gloves feature a 13 gauge cut-resistant HPPE liner that is tear and abrasion-resistant. The foam nitrile coating absorbs oil to increase grip, while the additional foam coating acts like a sponge to help increase gripping power. Specifications include ANSI Cut Level 2, Abrasion Rating 4, Circular Blade Cut Rating 1, Tear Rating 3, and Puncture Rating 1. So if you're looking for a glove that can handle whatever you throw at it, then you need the Pyramex GL602C3.

Features:

• 13 gauge cut-resistant HPPE liner
• Tear and abrasion resistant
• Foam nitrile absorbs oil to increase grip
• Additional foam coating acts like a sponge to help increase gripping power

Specifications:

• ANSI Cut Level: 2
• Abrasion Rating: 4
• Circular Blade Cut Rating: 1
• Tear Rating: 3
• Puncture Rating: 1

Materials:

• Coating: Micro-foam nitrile
• Liner shell: 13 gauge HPPE
• Cuff: HPPE & latex elastic

This product contains components that may be a potential risk to allergic reactions (latex in the wrist cuff). Do not use in the event of hypersensitivity signs or a known allergy to latex.

Cleaning:

• Wash in warm water (30-40°C) (86-104°F)
• Use mild detergent
• Short cycle time (5-10 minutes)
• Low Tumble dry (60°C max) (140°F max)

Do not use any chemicals or sharp-edged objects for cleaning the gloves. Cleaning can alter the performance levels of the glove.

Standards:

• CE EN388 standard features abrasion, cut, tear and puncture ratings. Abrasion ratings are based on the number of cycles required to abrade through the sample glove. Cut ratings are based on the number of cycles required to cut through the sample at a constant speed. Tear ratings are based on the amount of force required to tear the sample. Puncture ratings are based on the amount of force required to pierce the sample with a standard-sized point.
• ANSI standard features cut ratings that range from A1 through A9. Cut ratings are based on the grams of weight needed to cut through the material. Our ANSI cut level glove options include A2 (500-999 grams to cut), A3 (1,000-1,499 grams to cut) and A4 (1,500-2,199 grams to cut).